 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DAN235U Diodes Band switching diode DAN235U Application High speed switching External dimensions (Unit : mm) Lead size figure (Unit : mm) 0.8MIN. 2.00.2 0.30.1 Each lead has same dimension (3) 0.9MIN. 1.250.1 2.10.1 Features 1) Small mold type. (UMD3) 2) High reliability. 0.150.05 1.3 00.1 UMD3 (2) (1) 0.65 0.70.1 0.90.1 Construction Silicon epitaxial planar 0.65 0.1Min 1.30.1 Structure ROHM : UMD3 JEDEC : SOT-323 JEITA : SC-70 dot (year week factory) Taping dimensions (Unit : mm) 4.00.1 2.00.05 1.550.05 0.30.1 1.750.1 3.50.05 8.00.2 2.40.1 5.50.2 2.250.1 0 4.00.1 0.50.05 00.1 2.40.1 1.250.1 Absolute maximum ratings (Ta=25C) Parameter Symbol Power dissipation Pd VR Reverse voltage (DC) Junction temperature Tj Storage temperature Tstg Limits 150 35 125 -55 to +125 Unit mW V Electrical characteristics (Ta=25C) Parameter Symbol Forward voltage Reverse current Capacitance between terminals Forwad operating resistance VF IR Ct rf Min. - Typ. - Max. 1.0 10 1.2 0.9 Unit V nA pF Conditions IF=10mA VR=25V VR=6V , f=1MHz IF=2mA , f=100MHz Rev.B 1.6 0.65 1/3 DAN235U Diodes Electrical characteristic curves (Ta=25C) 100 FORWARD CURRENT:IF(mA) REVERSE CURRENT:IR(nA) 100 Ta=125 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 10 f=1MHz 10 1 0.1 0.01 0.001 Ta=75 Ta=25 10 Ta=75 Ta=125 Ta=25 Ta=-25 1 1 Ta=-25 0.1 0.01 0 100 200 300 400 500 600 700 800 900 1000 1100 0.0001 0 5 FORWARD VOLTAGEVF(mV) VF-IF CHARACTERISTICS 0.1 10 15 20 25 30 REVERSE VOLTAGEVR(V) VR-IR CHARACTERISTICS 35 0 5 10 15 20 25 30 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 860 FORWARD VOLTAGE:VF(mV) REVERSE CURRENT:IR(nA) 0.2 Ta=25 IF=10mA n=30pcs 1 Ta=25 VR=25V n=30pcs 0.18 0.16 0.14 0.12 0.1 0.08 0.06 0.04 0.02 0 AVE:0.0285nA 0.9 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 850 840 830 820 810 VF DISPERSION MAP 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 AVE:0.865pF Ta=25 VR=6V f=1MHz n=10pcs AVE:834.0mV IR DISPERSION MAP Ct DISPERSION MAP 20 RESERVE RECOVERY TIME:trr(ns) PEAK SURGE FORWARD CURRENT:IFSM(A) Ifsm 1cyc 8.3ms 5 4 3 2 1 AVE:1.20ns Ta=25 VR=6V IF=10mA RL=100 Irr=0.1*IR n=10pcs 1 0.9 FORWARD OPERATING RESISTANCE:rf() 15 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 AVE:0.630 Ta=25 f=100MHz IF=2mA n=10pcs 10 5 AVE:5.60A 0 IFSM DISRESION MAP 0 trr DISPERSION MAP FORWARD CURRENT:IF(mA) rf DISPERSION MAP 10 9 PEAK SURGE FORWARD CURRENT:IFSM(A) TRANSIENT THAERMAL IMPEDANCE:Rth (/W) 100 Ifsm 8.3ms 8.3ms 1cyc 1000 Rth(j-a) 8 7 6 5 4 3 2 1 0 1 PEAK SURGE FORWARD CURRENT:IFSM(A) Ifsm t 100 Rth(j-c) Mounted on epoxy board IM=1mA IF=10mA 10 10 1ms time 300us 1 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 100 0.1 10 TIME:t(s) IFSM-t CHARACTERISTICS 1 100 1 0.001 0.1 10 TIME:t(s) Rth-t CHARACTERISTICS 1000 Rev.B 2/3 DAN235U Diodes 10 9 ELECTROSTATIC DISCHARGE TEST ESD(KV) 8 7 6 5 4 3 2 1 0 C=200pF R=0 C=100pF R=1.5k AVE:1.55kV AVE:7.38kV ESD DISPERSION MAP Rev.B 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1 |
Price & Availability of DAN235U
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |